20-23dBm 2100 Single Wide Band Booster;
Features:
1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
Expansion and extention of the signal of base station.
Optimization of the quality of the signal and source
3.High linear design, ALC function design, low interference to BTS.
4. Support any cellular devices (voice & data & video)
5. Wide band signal booster, or customize selective band booster.
Antenna isolation testing,Prevent the oscillation
6. Support Single system CDMA450, LTE700, LTE800, iDEN, CDMA800/GSM850,
GSM900, EGSM, AWS1700, DCS1800, PCS1900,WCDMA, LTE2600,etc
Description:
Indoor Signal Booster series is an ideal solution for small/medium businesses and home users looking to enhance indoor wireless connectivity. It is connected via coaxial cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the building where it has easy access to a BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area.
Standard Package:
1) AC90-264V, DC9V/3A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
Recommended Accessories:
1)Donor antenna: Patch antenna
2)Service antenna: Omni Ceiling Antenna or Panel Antenna
3)2 units of 10mter of cable with connecter (Cable length optional)
Application:
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, etc.
Specification for Single band LTE2600 Repeater
Frequency Range | Uplink | Downlink |
LTE 2600 | 2500 - 2570MHz | 2620 - 2690MHz |
Max.
Gain | 60dB | 65dB |
Max.
Output Power | 14dBm | 20-23dBm |
Band width | Wide Band |
Manual Gain Control | 31dB /
1dB Step |
Automatic Gain Control | >20dB |
Ripple in-band | ≤ 6dB |
Return loss | ≤ -10dB |
Noise Figure | ≤ 6dB |
Spurious Emission & Intermodulation | 9KHz~1GHz | ≤ -36dBm |
1~12.75GHz | ≤ -30dBm |
WCDMA | Spurious Emission Mask | Meet 3GPP TS 25.143 ( V 6.2.0 ) |
Modulation Accuracy | ≤ 12.5% |
Peak Code Domain Error | ≤ -35dB@Spreading
Factor 256 |
Time Delay | ≤ 1.5 μs |
Frequency stability | ≤ 0.01ppm |
MTBF | > 50000 hours |
Power Supply | AC100-240V,DC9V/3A |
Power LED | Power indicator |
ISO LED | Red | Autoexcitation or High Power |
Green | Standard |
AGC LED | Off | Low Power or No power |
Green | Standard |
Red | Full Signal, ALC On |
Mechanical
Specification |
RF Connector | N-Female |
Impedance | 50 ohm |
Humidity | < 90% |
Operating
Temperature | -10°C ~55°C |
Environment
Conditions | IP40 |
Size | 204mm×128mm×27mm |
Weight | < 1.5 Kg |