GSM+UMTS Dualband Selective Repeater with Remote Function
Publish time 2017-05-02 14:11
GSM+UMTS Dualband Selective Repeater with Remote Function
1. Electrical Specification |
GSM--GCPR-GW20 | Uplink | Downlink |
Frequency Range | GSM Band | 894,5-904,1 MHz | 939,5-949,1 MHz |
Bandwidth |
| 10MHz |
Maximum Gain | 70dB |
passband ripple | ≤ ±3dB |
Output Power | ≧18 dBm |
Out of Band Gain | ±400KHz | < 50dB |
±600KHz | < 40dB |
±1MHz | < 35dB |
±5MHz | < 25dB |
Intermodulation Products | 9KHz~1GHz | ≦ -36dBm |
1GHz~12.75GHz | ≦ -30dBm |
Spurious Emission | 9KHz~1GHz | ≦ -36dBm |
1GHz~12.75GHz | ≦ -30dBm |
UMTS--GCPR-GW20 | Uplink | Downlink |
Frequency Range | 1935-1950MHz | 2125-2140 MHz |
Bandwidth | 15MHz |
Maximum Gain | 70dB |
passband ripple | ≤ ±3dB |
Output Power | ≧18 dBm |
Out of Band Gain | 2.7≦f_offset<3.5MHz | <60dB |
3.5≦f_offset<7.5MHz | <45dB |
7.5≦f_offset<12.5MHz | <45dB |
12.5≦f_offset | <35dB |
Spurious Emission | 9kHz~150KHz | ≦ -36dBm/1 kHz |
150kHz~30MHz | ≦ -36dBm/10 kHz |
30MHz~1GHz | ≦ -36dBm/100 kHz |
1 GHz ~ Flow - 10 MHz | ≦ -30dBm/1 MHz |
Flow - 10 MHz ~ Fhigh + 10 MHz | ≦ -15dBm/1 MHz |
Fhigh + 10 MHz ~12.75 GHz | ≦ -30dBm/1 MHz |
ACRR | 20dBc/30KHz@±5MHz |
20dBc/30KHz@±10MHz |
Frequency Stability | ≦±0.01ppm |
Error Vector Magnitude | ≦ 12.5% |
Peak Code Domain Error | ≦-35dB@Spreading Factor 256 |
GSM&UMTS |
|
Time Delay | ≤ 6 μsec |
Plug and play function | ≧18 dBm |
Manual Gain Control | 31dB in step of 1dB |
Automatic Gain Control | ≧30dB |
Max. Input Power Without Damage | ≧0dBm |
Noise Figure | ≤ 8 dB (For maximal gain) |
VSWR | ≦2.0 |
Power Consumption | ≦ 50W |
Power Supply | AC110-240V 50Hz/DC 5A/9V |
2. Mechanical specification |
Dimensions | 189*268*58mm |
Weight | ≦4.5kg |
I/O Connector/ Impedance | N-female / (Nominal)50Ω |
3. Environmental specification |
IP Rating | IP30 |
Operating Temperature | -10 - +50'C |
4. Monitoring specification |
Alarm | specification |
|
LED indication | Power LED | DC ON/OFF |
|
Alarm LED | ALC1~5dB,red |
option for remote access via laptop for setting up parameters necessary for adequate operations. |