or Band selective System(15dbm-30dbm)--Industrial type
Features:
1. 5 bars of the output signal strength indication , which shows you the maximum output power of the repeater. Each signal bar represents 5dB.
2. The specific value of the input signal strength measured in dBm, tell us the exact input signal level.
3. Shows the UL&DL central frequency of the supporting system.
4. Antenna Isolation Detection. When first power on the repeater, the repeater will detect the oscillation automatically between the outdoor antenna and indoor antenna.
5. Uplink Sleep Mode. The uplink of the repeater is in standby mode when there is no call or data transmission. It will activate immediately when a call a data session is initiated.
6. Show the UL maximum gain.
7. Show the DL maximum gain.
8. Enter for selection or confirm the settings.
9. Back to the previous page or cancel the settings.
10. Increase the gain or upward adjusting the central frequency.
11. Decrease the gain or downward adjusting the central frequency.
12. Smart function. The repeater could set the gain automatically to prevent the Alarm. Press this icon to turn ON or turn OFF this function.
|
Electrical specification
|
Uplink
|
Downlink
|
|
Frequency Range
|
CDMA800
|
824 ~ 849 MHz
|
869 ~ 894 MHz
|
|
CDMA1900
|
1850 ~ 1910 MHz
|
1930 ~ 1990 MHz
|
|
GSM850
|
824 ~ 849 MHz
|
869 ~ 894 MHz
|
|
GSM&GSM
|
880 ~ 915 MHz
|
925 ~ 960 MHz
|
|
DCS
|
1710 ~ 1785 MHz
|
1805 ~ 1880 MHz
|
|
PCS
|
1850 ~ 1910 MHz
|
1930 ~ 1990 MHz
|
|
WCDMA
|
1920 ~ 1980 MHz
|
2110 ~ 2170 MHz
|
|
AWS
|
1710 ~ 1755 MHz
|
2110 ~ 2155 MHz
|
|
LTE700
|
700 MHz( A, B, C, D band optional)
|
|
LTE800
|
832-862 MHz
|
791-821 MHz
|
|
LTE2600
|
2500 ~ 2550 MHz
|
2620 ~ 2670 MHz
|
|
Max .Output Power
|
GCPR-15
|
≥12dBm
|
≥15dBm
|
|
GCPR-20
|
≥15dBm
|
≥20dBm
|
|
GCPR-23
|
≥15dBm
|
≥23dBm
|
|
GCPR-27
|
≥20dBm
|
≥27dBm
|
|
GCPR-30
|
≥20dBm
|
≥30dBm
|
|
Max .Gain
|
GCPR-15
|
≥ 65dB
|
≥ 70dB
|
|
GCPR-20
|
≥ 70dB
|
≥ 70dB
|
|
GCPR-23
|
≥ 70dB
|
≥ 75dB
|
|
GCPR-27
|
≥ 75dB
|
≥ 80dB
|
|
GCPR-30
|
≥ 75dB
|
≥ 80dB
|
|
Bandwidth
|
Wide Band
|
|
Maximum Input Power
|
≥0dBm
|
|
MGC（Step Attenuation）via touch panel
|
31dB / 1dB step
|
|
Automatic Level Control
|
≥ 20dB
|
|
Passband Ripple
|
≤5dB
|
Out of Band Gain
|
2.7≦f_offset＜3.5MHz
|
<60dB
|
|
3.5≦f_offset＜7.5MHz
|
<45dB
|
|
7.5≦f_offset＜12.5MHz
|
<45dB
|
|
12.5≦f_offset
|
<35dB
|
Spurious Emission
|
9kHz~150KHz
|
≦ -36dBm/1 kHz
|
|
150kHz~30MHz
|
≦ -36dBm/10 kHz
|
|
30MHz~1GHz
|
≦ -36dBm/100 kHz
|
|
1 GHz ~ Flow - 10 MHz
|
≦ -30dBm/1 MHz
|
|
Flow - 10 MHz ~ Fhigh + 10 MHz
|
≦ -15dBm/1 MHz
|
|
Fhigh + 10 MHz ~12.75 GHz
|
≦ -30dBm/1 MHz
|
|
ACRR
|
20dBc/30KHz@±5MHz
|
|
20dBc/30KHz@±10MHz
|
|
Frequency stability
|
≤ 0.01ppm
|
|
Error Vector Magnitude
|
≦ 12.5%
|
|
Peak Code Domain Error
|
≦-35dB@Spreading Factor 256
|
|
Noise Figure
|
≤6dB
|
|
V.S.W.R
|
≤ 2.0
|
|
Group Delay
|
≤ 5μs
|
|
Power Consumption
|
≤10W
|
|
Cooling
|
Heatsink Convection cooling
|
|
Intelligent Functions
|
Standard
|
|
ISO(Donor antenna and Service antenna)
|
Flickering per 1s when the Isolation is not enough; it lights up when is normal.
|
|
Uplink Sleep Mode
|
Flickering per 1s when there is no users in the coverage.
The uplink circuit will shut off, and the ground noise will be less than -70dBm.
Light up when there are users in the coverage.
|
|
Smart Mode
|
Automatically adjust the gain in both links according to the specific environment.
|
|
Input and Output signal strength
|
Shown Input signal strength with numerial number.
Shown Output signal strength with signal bars.
|
|
LED Alarm
|
Standard
|
|
Power LED
|
Green @ Normal work
|
|
ALC LED
|
Orange @ ALC 1~5dB, Red @ ALC 20dB~25dB
|
|
Mechanical Specifications
|
Standard
|
|
I /O Port
|
N-Female
|
|
Impedance
|
50 ohm
|
|
Operating Temperature
|
-10℃~+55℃
|
|
Environment Conditions
|
IP40
|
|
Dimensions
|
150*210*36mm
|
|
Weight
|
≤2.5KG
|
|
Power Supply
|
Input AC100~240V,output DC 12V / 3A
|
