Gainer International (China) Limited

Mobile repeater manufacturer

4G LTE Signal Cellphone DIP Repeater 20dbm
    Publish time 2015-05-29 17:01    

4G LTE 20dBm Single band Signal Repeater


1.  Elegant and Compact design
2.  Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3.  31dB MGC(Manual gain control) 1dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4.  Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5.  Low power consumption - 6W

Electrical specification   Uplink Downlink
Frequency Range LTE 4G 700 MHz( A, B, C, D band optional)
2500 ~ 2550 MHz 2620 ~ 2670 MHz
Max .Gain 65dB 70dB
Max .Output Power 15dBm   20dBm
Band width (-3dB) Wide Band
MGC ( Step Attenuation ) 31dB / 1dB step
Automatic Level Control                               15dB,auto shut off 31dB after 15dB
Gain Flatness ≤6dB(P-P)
Noise Figure 6dB
VSWR 1.8
Group Delay 5μs
Frequency stability 0.01ppm
Spurious Emission & Output inter-modulation GSM Meet ETSI TS 151 026 V6.1.0
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 )
CDMA Meet IS95 & CDMA2000
LED Alarm Standard
Power LED Green light when power on.
ALC LED  Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB,            
LED off after 5 second red color
Mechanical Specifications Standard
I /O Port N-Female
Impedance  50 ohm
Operating Temperature -25ºC~+55ºC
Environment Conditions IP40
Dimensions 250x125x52mm
Weight 3Kg
Power Supply Input AC90~264V,output DC12V / 3A

友情链接Link:  百度    google

Copyright @ 2019 Gainer International Limited.All rights reserved.