臻意国际有限公司
Gainer International (China) Limited
LTE800/EGSM/DCS1800 Intelligent triband repeater with AGC,MGC,ALC(30dB)
Features：
1. Cost effective solution for weak
signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
Expansion and extention of the signal of base station.
Optimization of the quality of the signal and source
3. Cover about 500~2000 m² without block or obstruct.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wide band signal booster, or customize selective band booster.
Description:
Indoor Signal Booster series
is an ideal solution for small/medium businesses and home users looking to
enhance indoor wireless connectivity. It is connected via coaxial cable to
Donor Antenna and Service Antenna, Donor Antenna is placed outside the building
where it has easy access to a BTS signal, and the Service Antenna is placed in
the building where it can extend radio coverage to the blind area.
Advantages:
Smart Function, Intelligent digital
mode setting.
Smart function called which can be activated via the front digital
panel.
users can adjust gain and choose working band by LED digital
panel, This smart function is easier than DIP Switch,
will set up parameters more fast and more accurate,
It is a simple, safe and effective way.
Standard
Package:
1) AC90-264V, power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard,
etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS
Recommended
Accessories:
1)Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3)5D-FB coaxial cable with connecter (Cable
length optional)
Application:
To expand signal coverage of fill signal blind
area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, etc.
Specification.
|
Frequency Range |
Uplink |
Downlink |
|||
|
EGSM 900 |
880 - 915MHz |
925 - 960MHz |
|||
|
LTE800 |
832 - 862MHz |
791 - 821MHz |
|||
|
DCS1800 |
1710 - 1785MHz |
1805- 1880MHz |
|||
|
Max. Gain |
65dB |
70dB |
|||
|
Max. Output Power |
17dBm |
20dBm |
|||
|
Band width |
Wide Band |
||||
|
Manual Gain Control |
31dB / 1dB Step |
||||
|
Automatic Gain Control |
>25dB |
||||
|
Ripple in-band |
≤ 6dB |
||||
|
Return loss |
≤ -10dB |
||||
|
Noise Figure |
≤ 6dB |
||||
|
Spurious Emission |
9KHz~1GHz |
≤ -36dBm |
|||
|
1~12.75GHz |
≤ -30dBm |
||||
|
Third-Order Intermodulation |
≤ -40dBc |
||||
|
WCDMA |
Spurious Emission Mask |
Meet 3GPP TS 25.143 ( V 6.2.0 ) |
|||
|
Modulation Accuracy |
≤ 12.5% |
||||
|
Peak Code Domain Error |
≤ -35dB@Spreading Factor 256 |
||||
|
Time Delay |
≤ 1.5 μs |
||||
|
Frequency stability |
≤ 0.01ppm |
||||
|
MTBF |
> 50000 hours |
||||
|
Power Supply |
AC100-240V |
||||
|
Power LED |
Power indicator |
||||
|
Alarm LED |
Green |
Standard |
|||
|
Red |
Self-oscillation or High Power |
||||
|
Mechanical Specification |
|||||
|
RF Connector |
N-Female |
||||
|
Switch |
Power Switch |
||||
|
Cooling |
Heatsink Convection cooling |
||||
|
Impedance |
50 ohm |
||||
|
Humidity |
< 90% |
||||
|
Operating Temperature |
-25°C ~ +55°C |
||||
|
Environment Conditions |
IP40 |
||||
|
Size |
268mm*58mm*350mm |
||||
|
Weight |
< 7 Kg |
||||