UMTS Selective Repeater with Remote Function

NameDescriptionContent

臻意国际有限公司

Gainer International (China) Limited

Mobile repeater manufacturer

ProductDetails

UMTS Selective Repeater with Remote Function

Publish time 2017-05-02 14:07

UMTS Selective Repeater with Remote Function 1. Electrical Specification
UMTS--GCPR-W20			Uplink	Downlink
Frequency Range		UMTS Band	1935-1950 MHz	2125-2140 MHz
Bandwidth			15MHz
Maximum Gain			70dB
passband ripple			≤ ±3dB
Output Power			≧18 dBm
Time Delay			≤ 6 μsec
Plug and play function			≧18 dBm
Out of Band Gain	2.7≦f_offset＜3.5MHz		<60dB
	3.5≦f_offset＜7.5MHz		<45dB
	7.5≦f_offset＜12.5MHz		<45dB
	12.5≦f_offset		<35dB
Spurious Emission	9kHz~150KHz		≦ -36dBm/1 kHz
	150kHz~30MHz		≦ -36dBm/10 kHz
	30MHz~1GHz		≦ -36dBm/100 kHz
	1 GHz ~ Flow - 10 MHz		≦ -30dBm/1 MHz
	Flow - 10 MHz ~ Fhigh + 10 MHz		≦ -15dBm/1 MHz
	Fhigh + 10 MHz ~12.75 GHz		≦ -30dBm/1 MHz
ACRR			20dBc/30KHz@±5MHz
			20dBc/30KHz@±10MHz
Frequency Stability			≦±0.01ppm
Error Vector Magnitude			≦ 12.5%
Peak Code Domain Error			≦-35dB@Spreading Factor 256
UMTS
Manual Gain Control			31dB in step of 1dB
Automatic Gain Control			≧30dB
Max. Input Power Without Damage			≧0dBm
Noise Figure			≤ 8 dB (For maximal gain)
VSWR			≦2.0
Power Consumption			≦ 50W
Power Supply			AC110-240V 50Hz / DC 5A/9V
2. Mechanical specification
Dimensions			18926858mm
Weight			≦4kg
I/O Connector/ Impedance			N-female / (Nominal)50Ω
3. Environmental specification
IP Rating			IP30
Operating Temperature			-10 ~ +50 ℃
4. Monitoring specification
Alarm		specification
LED indication	Power LED	DC ON/OFF
	Alarm LED	ALC1～5dB,red
option for remote access via laptop for setting up parameters necessary for adequate operations.

友情链接Link：百度 google